Welding, Cutting & Surface Preparation — Oxy-Fuel Cutting
Oxy-Acetylene Twin Hose Set 6 mm × 5 m with Fittings
6 mm × 5 m twin oxy-acetylene welding hose set with fitted connectors — standard site outfit hose for welding and cutting.
Product Overview
Twin-line 6 mm ID reinforced rubber hose, 5 m, for oxy-acetylene welding and cutting. Blue hose for oxygen (RH thread fittings), red hose for acetylene (LH notched fittings). Pre-fitted connectors for immediate use. EN ISO 3821 rated for oxygen and acetylene service. Working pressure oxygen 16 bar, acetylene 4 bar.
For acetylene service only — do not use on LPG/propane without confirming hose and fitting compatibility. Inspect for cracks, cuts, and fitting integrity before each use.
Technical Specifications
| Consumable Type | Gas Hose Set |
| Fuel Gas | Acetylene |
| Bore Mm | 6 |
| Length M | 5 |
| Hose Type | Twin |
Standards & Certifications
Industries
Other Products in Hose Sets
Example Welding
Oxy-Acetylene Twin Hose Set 8 mm × 10 m with Fittings
8 mm × 10 m twin oxy-acetylene hose set for larger-diameter cutting torch applications and longer runs from cylinder bank.
Example Welding
Oxy-LPG Twin Hose Set 6 mm × 5 m with Fittings
6 mm × 5 m twin oxy-LPG/propane hose set with LPG-compatible fittings — for sites operating on propane or butane fuel gas.